Products from Jabsco
JABSCO is a manufacturer for high quality pumps and toilettes for the use on board.
No results were found for the filter!
Float switch JABSCO HYDRO AIR Pump switch without moving parts or delicate sensors. Switching power 240 VA. Switch function is triggered by air pressure. No electric installation underwater. Includes: Plastic measuring bell, 1.8 m air hose (diameter = 8 mm), Switch...
from €71.65
Art.-Nr.: 1439...
Drinking water filter AQUA-FILTA Drinking water filter for a fixed installation with replaceable filter cartridge. Filter material: silver impregnated activated carbon, absorbs disagreeable taste and smell by filtering pollution, organic substances as well as Chlorine...
from €62.87
Art.-Nr.: 1800...
Impeller pump JABSCO Self-priming impeller pump with free shaft end. Pump housing of bronze, axle of stainless steel, ball bearings, neoprene impeller. Specified output at 1500 U/min and back pressure at 0.3 bar.
from €174.49
Art.-Nr.: 1804...
Impeller JABSCO Original long-lived JABSCO neoprene rubber impeller. Usually the impellers come with matching cover gaskets of paper. We'll happily send you the impeller of nitrile rubber as well as other JABSCO impellers and spare parts not shown here.
from €24.90
Art.-Nr.: 1804...
Tool for removing impellers JABSCO An exceptionally practical tool for removing impellers without damaging the pump housing. Body and jaws of aluminum, shaft of stainless steel. Dimensions, approx. 140 x 165 mm (W x H). Weight, 450 g.
from €77.01
Art.-Nr.: 1804...
Grease for impellers JABSCO Accessory for JABSCO impellers: JABSCO impeller grease, 2,5 ml tube.
€2.44
Art.-Nr.: 1804...
Impeller pump WATER-PUPPY 2000 Efficient electric pump with brass housing, impeller of nitrile rubber (oil-proof), dry self-priming to 1.2 m. Power 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), intended for endurance use. Dimensions 190 x 120 x 80 mm....
€198.86
Art.-Nr.: 1805...
Impeller pump JABSCO UTILITY-PUPPY 2000 Efficient electric pump with brass housing, impeller of nitrile rubber (oil-proof), dry self-priming to 1.2 m. Power 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), intended for endurance use. Dimensions 190 x 120 x 80 mm....
€340.20
Art.-Nr.: 1805...
Impeller pump JABSCO with mechanical cone clutch With mechanical cone clutch. These pumps work via a V-belt and can be coupled by hand when needed. Pump with high output (specification at 1500 U/min and a back pressure of 0.3 bar) and self priming from dry. Well suited as an emergency...
from €1,004.03
Art.-Nr.: 1808...
Impeller pump JABSCO eclectric magnet clutch With electric magnet clutch, 12V or 24V. Pump with high output (specification at 1500 U/min and a back pressure of 0.3 bar), self priming from dry. Well suited as emergency pump or as a deck-wash pump. Pump housing, bronze, stainless...
from €674.56
Art.-Nr.: 1808...
Y-valve JABSCO This valve is lockable using a padlock. Pursuant to the HELCOM accord it is compliant with ISO 8099, which prescribes a lockable outlet for all holding tanks since. With this valve you can fulfill this requirement! Plastic, for hoses d =...
from €83.73
Art.-Nr.: 1928...
Non return valve JABSCO Non return valve made from plastic by the global market leader JABSCO with hose connectors on both ends and a check valve made from Nitrile rubber.
from €28.50
Art.-Nr.: 1929...
Top seller
