No results were found for the filter!
2733_01 WEST SYSTEM microsphere blend filler Typ 409
A pure white, hollow glass bubble based, low density filler designed for filling and fairing of fibreglass. When the filler is mixed with WEST SYSTEM epoxy at a ratio of 10% to 25% by weight, it creates a smooth creamy paste for filling...
Content 0.1 kg (€149.00 * / 1 kg)
from €14.90
Art.-Nr.: 2733...
2729_01 WEST SYSTEM milled glass fibre blend filler Typ...
A high density blended filler consisting of loose chopped glass and other fillers, intended for small semi structural repairs, filling voids, or small scale impact damage to glass fibre laminates. The finished repairs are incredibly...
Content 0.15 kg (€146.00 * / 1 kg)
from €21.90
Art.-Nr.: 2729...
2730_01 WEST SYSTEM Microfibres Typ 403
A blend of fine cotton fibers, used as a thickening additive for bonding applications. Epoxy thickened with 403 fibres provides good wetting out of the substrate and excellent gap-filling properties. They give the resin a better...
Content 0.16 kg (€96.88 * / 1 kg)
from €15.50
Art.-Nr.: 2730...
2731_01 WEST SYSTEM colloidal silica filler Typ 406
General purpose thickening additive suitable for bonding, gap-filling and filleting. It can be used to prevent resin flow on vertical and overhead surfaces and to control the viscosity of the epoxy. It is often used in combination with...
Content 0.06 kg (€253.33 * / 1 kg)
from €15.20
Art.-Nr.: 2731...
2732_01 WEST SYSTEM low-density filler Typ 407
A blended microballoon-based filler used to make fairing putties which are easy to sand but remain strong on a strength-to-weight basis. Add 20% to 40% by weight to mixed WEST SYSTEM epoxy. Cures to a dark reddish-brown colour.
Content 0.15 kg (€166.00 * / 1 kg)
from €24.90
Art.-Nr.: 2732...
2734_01 WEST SYSTEM Microlight Filler Typ 410
410 MicrolightT is the ideal low-density filler for creating a lightweight, easily worked fairing compound especially suited for large areas. Microlight is easily blended into the epoxy mix at additions between 7% to 16% by weight and...
Content 0.05 kg (€358.00 * / 1 kg)
from €17.90
Art.-Nr.: 2734...
2735_01 WEST SYSTEM filleting blend filler Typ 405
Consists of a mix of cellulose fibres and other fillers for use in filleting applications when a naturally finished interior is intended. Alchohol or waterbased stains may be added to adjust the colour. Add 15% to 25% by weight to the...
Content 0.15 kg (€103.33 * / 1 kg)
from €15.50
Art.-Nr.: 2735...
2738*01 WEST SYSTEM Aluminiumpulver Additiv Typ 420 WEST SYSTEM aluminium powder additive typ 420
Add between 5% to 10% by volume to provide protection from ultraviolet light in areas which will not be protected with other coatings and as a base for subsequent painting. Will substantially increase the hardness of the coated surface....
Content 0.1 kg (€99.50 * / 1 kg)
€9.95
Art.-Nr.: 2738...
2738*03 WEST SYSTEM Sperrschicht-Füller Additiv Typ 422 WEST SYSTEM barrier coat additive typ 422
A proprietary blend designed to improve the moisture-exclusion effectiveness of WEST SYSTEM epoxy and to combat osmosis. It is an excellent additive for providing a barrier coating to overcome gelcoat blistering and also increases the...
Content 0.5 kg (€48.80 * / 1 kg)
from €24.40
Art.-Nr.: 2738...
2738*04 WEST SYSTEM Graphitpulver Additiv Typ 423 WEST SYSTEM graphite powder additive typ 423
A fine black powder added to WEST SYSTEM epoxy (10% by volume) to produce a low-friction exterior coating with increased scuff resistance, durability and mar-resistance. Epoxy/graphite is commonly used as a coating on rudders and...
Content 0.2 kg (€97.50 * / 1 kg)
€19.50
Art.-Nr.: 2738...
2738*06 WEST SYSTEM Farb-Pigmente WEST SYSTEM colour pigments
Can be added to the epoxy to provide a base colour for a final finish system. The coloured surfaces also tend to highlight flaws and imperfections. Pigments should be added at a rate of approximately 3%-5% by weight and should only be...
Content 0.13 kg (€160.00 * / 1 kg)
from €20.80
Art.-Nr.: 2738...
2736_01 WEST SYSTEM high-density filler Typ 404
A filler developed to maximise bond strength in hardware bonding where high cyclic loads are anticipated. With this, rather heavy filler, epoxy of highest compressive and tensile strength can be produced. It can also be used for...
Content 0.25 kg (€67.80 * / 1 kg)
from €16.95
Art.-Nr.: 2736...
Top seller
2731_01 WEST SYSTEM colloidal silica filler Typ 406
Content 0.06 kg (€253.33 * / 1 kg)
from €15.20
2732_01 WEST SYSTEM low-density filler Typ 407
Content 0.15 kg (€166.00 * / 1 kg)
from €24.90
2736_01 WEST SYSTEM high-density filler Typ 404
Content 0.25 kg (€67.80 * / 1 kg)
from €16.95
2734_01 WEST SYSTEM Microlight Filler Typ 410
Content 0.05 kg (€358.00 * / 1 kg)
from €17.90
2730_01 WEST SYSTEM Microfibres Typ 403
Content 0.16 kg (€96.88 * / 1 kg)
from €15.50
2738*03 WEST SYSTEM Sperrschicht-Füller Additiv Typ 422 WEST SYSTEM barrier coat additive typ 422
Content 0.5 kg (€48.80 * / 1 kg)
from €24.40
2735_01 WEST SYSTEM filleting blend filler Typ 405
Content 0.15 kg (€103.33 * / 1 kg)
from €15.50
2733_01 WEST SYSTEM microsphere blend filler Typ 409
Content 0.1 kg (€149.00 * / 1 kg)
from €14.90
2729_01 WEST SYSTEM milled glass fibre blend filler Typ...
Content 0.15 kg (€146.00 * / 1 kg)
from €21.90
2738*04 WEST SYSTEM Graphitpulver Additiv Typ 423 WEST SYSTEM graphite powder additive typ 423
Content 0.2 kg (€97.50 * / 1 kg)
€19.50
2738*06 WEST SYSTEM Farb-Pigmente WEST SYSTEM colour pigments
Content 0.13 kg (€160.00 * / 1 kg)
from €20.80
2738*01 WEST SYSTEM Aluminiumpulver Additiv Typ 420 WEST SYSTEM aluminium powder additive typ 420
Content 0.1 kg (€99.50 * / 1 kg)
€9.95