No results were found for the filter!
1163_01 Bow grip
Handhold or hawser grip, also good for various applications belowdecks (for example, drawer handles). Made from cast brass, polished or chromed finish.
from €25.40
Art.-Nr.: 1163...
1163_02 Strong handle FORESTI
Heavy cast-brass handle/hand-hold. Appropriate for a variety of inside and outside uses. Attached from below, using two M5-thread drilled blind holes. Polished or chromed finish.
from €26.95
Art.-Nr.: 1163...
1164-165 Heckgriff geschwungen poliert Transom handle polished or chromed brass
Delicately curved stern handle. Typical motorboat fitting, but also intended for mounting on dinghy deck transoms. Also works as a hand-hold or chest handle. Cast brass, polished or chromed finish.
from €16.90
Art.-Nr.: 1164...
1482_01 Stainless steel hand rail
Strong, polished A4 stainless steel hand rails. The base plates (60 mm in diameter) are equipped with three fastening holes (5 mm). The diameter of the tubing is 25 mm, the clear height is 45 mm.
from €39.90
Art.-Nr.: 1482...
1482_02 Stainless steel hand rail 45° bend
Strong, polished A4 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts. The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm. As an alternative we offer these...
from €42.00
Art.-Nr.: 1482...
1482_03 Stainless steel hand rail 90° bend
Strong, polished A4 stainless steel hand rails for mounting from the inside or the back with two M6 shoulder bolts. The diameter of the tube is 25 mm, the clear height is 45 mm, total height is 70 mm. As an alternative we offer these...
from €62.00
Art.-Nr.: 1482...
1482_04 Mounting plates for stainless steel hand rail
For our stainless steel hand rails with 45°- and 90° bend we offer an oval or a triangular base plate.
€16.50
Art.-Nr.: 1482...
1845_04 Hand rail teak
Made of teak, milled, cleanly rounded and sanded. Undrilled and unfinished. Dimensions: approx. 25 mm wide, approx. 60 mm high.
from €13.90
Art.-Nr.: 1845...
4700-000 Niedergang-Handgriff Messing gerade Companionway Handle
Beautiful, pleasant to grip, solid handle made of heavy, polished brass. Good for placing in the companionway or other places where a firm grip is required.
€69.00
Art.-Nr.: 4700...
4700_03 Companionway Handle angled
Sturdy handle with angled base plate made of heavy polished brass. Well suited for vertical mounting in the companionway, or elsewhere where a safe grip is required.
€69.00
Art.-Nr.: 4700...