Cowl Vents

1 From 3
No results were found for the filter!
1388_01 Brass cowl vent
Exceptionally heavy and thick-walled vent, made in a small casting workshop in northern Italy. Traditional nautical piece in a round or oval design with matte-polished finish. The sand-casting process by hand creates a finish that, with...
from €291.46
Art.-Nr.: 1389...
1466_01 Brass shell vent AMERIKA polished or chromed
Low-profile hood vent, made from polished or chromed brass, for mounting on the hull. Available in two sizes. Mounting using three M6 threaded blind holes.
from €34.61
Art.-Nr.: 1466...
1466_02 Brass shell vent BERGAMO
Flat vent made from polished, cast brass. There are two M6 screw bolts and nuts supplied for mounting. Available surfaces are: highly polished brass and chrome.
from €31.19
Art.-Nr.: 1466...
1467_01 clam vent DAVEY 2467
This vent, fashioned like a shell and made of polished bronze, screws into the deck. Can be mounted horizontally or vertically on deck or on the superstructure. A cross piece in the opening keeps spray and rainwater from flowing under...
from €73.60
Art.-Nr.: 1467...
1467_02 Cowl vent made from cast brass
Beautiful, heavy clam-shell vent. Traditionally sand-cast brass, with a high-gloss polish. Intended for horizontal or vertical mounting on deck or on superstructure. A straight cross piece in this design keeps all wetness from flowing...
from €71.65
Art.-Nr.: 1467...
1468_01 Bronze half cowl vent DAVEY
Polished bronze half-cowl vent to be screwed onto the sides of superstructure or wheel houses. Height 140 mm, opening 60 mm.
€106.25
Art.-Nr.: 1468...
1468_02 Cowl vent bronze DAVEY DL2470
Elegant, very robust cowl vent by the traditional British manufacturer DAVEY . Round design. Heavy bronze casting, perfectly hand polished. Including deck flange, cover and bronze key.
from €511.77
Art.-Nr.: 1468...
1490_02 Cowl vents made from silicone VETUS
Popular cowl ventilators made of durable white silicone. These cowls are revolving and removable. The clamping ring can be fastened by hand, or with a special tool, which is supplied as standard. If the tool is used for fastening, the...
from €48.64
Art.-Nr.: 1490...
1490_03 Cowl vent silicone VETUS
A popular cowl ventilator made of long lived white silicone. This cowl is revolving and removable. The clamping ring can be fastened by hand, or with a special tool, which is supplied as standard. The inside of the cowl is red, it comes...
€48.64
Art.-Nr.: 1490...
1490_04 Stainless steel cowl vents by VETUS
Popular cowl ventilators made of cast stainless steel. These cowls are revolving and removable. The clamping ring can be fastened by hand, or with a special tool, which is supplied as standard. If the tool is used for fastening, the risk...
from €229.08
Art.-Nr.: 1490...
1490_05 Cowl vent stainless steel VETUS
A popular cowl ventilator made of stainless steel. This cowl is revolving and removable. The clamping ring can be fastened by hand, or with a special tool, which is supplied as standard. The inside of the cowl is red, it comes complete...
€229.08
Art.-Nr.: 1490...
1751_01 Cowl vent bronze or stainless steel finish
Bronze or stainless steel finish! Cowl vent of V4A cast stainless steel, complete with deck attachment and cover. Round design. We can deliver this classic vent in either of two finishes: Polished stainless steel or Bronze-colored...
from €242.72
Art.-Nr.: 1751...
1 From 3