REFLEKS

1 From 3
No results were found for the filter!
1836_01 Rotary ventilator ASPIROMATIC stainless steel
Rotating stainless steel vent that can also be used as a gas vent for all opening types, protected against backdrafts and supports the correct draft of the chimney. The (folding) extraction fan runs on ball bearings and is propelled by...
from €271.97
Art.-Nr.: 1836...
1836_02 REFLEKS-adapter for ASPIROMATIC ventilator
Fits the REFLEKS 90 mm flue pipe system, in order to attach the small ASPIROMATIC ventilator (Art-Nr. 1836-160). Stainless steel, 1 mm wall thickness. Diameter 95 / 150 mm, height 95 mm.
€95.53
Art.-Nr.: 1836...
4112_01 DICKINSON flue tube cover
Exhaust hood for DICKINSON stove pipes. Rain-proof standard hood, made of stainless steel. As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.
from €184.24
Art.-Nr.: 4112...
4116_01 DICKINSON exhaust hood
Exhaust hood for DICKINSON stove pipes. H - shaped, for difficult ventilation situations. Stainless steel. As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.
from €184.24
Art.-Nr.: 4116...
4250_01 Flue pipes REFLEKS
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets. Made of acid-proof stainless steel (wall depth 0.6 mm). Plugs together: slightly conical with pressed sleeve on one side.
from €26.81
Art.-Nr.: 4250...
4251_01 Flue pipe elbow 45° REFLEKS
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets. Made of acid-proof stainless steel (wall depth 0.6 mm). Plugs together: slightly conical with pressed sleeve on one side.
from €48.25
Art.-Nr.: 4251...
4251_02 Flue pipe elbow 90° REFLEKS
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets. Made of acid-proof stainless steel (wall depth 0.6 mm). Plugs together: slightly conical with pressed sleeve on one side.
from €51.18
Art.-Nr.: 4251...
4251_03 Flue pipe elbow 90° REFLEKS with cleanout door
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets. Made of acid-proof stainless steel (wall depth 0.6 mm). Plugs together: slightly conical with pressed sleeve on one side.
from €58.98
Art.-Nr.: 4251...
4252_01 Flue gas damper REFLEKS
Pipe socket with draft flap for draw regulation and performance improvement of REFLEKS stoves. The exhaust ventilation is installed directly over the stove and when used automatically guides air into the exhaust guide pipe. Recommended...
from €120.87
Art.-Nr.: 4252...
4254_01 Flue guard REFLEKS
Guard for flue pipes that are installed in close quaters. Avaiable in stainless steel, brass or copper plate. The risk of contact burns is minimized, but the warmth of the pipe can still be enjoyed. Matches REFLEKS flue pipes of 70 mm or...
from €91.14
Art.-Nr.: 4254...
4255_02 Wall shade inox
Small reflector plate for heat protection behind flue pipes. Plate stainless steel. Measurements: 50cm high, 15cm wide. Available as flat or recessed version. The flat plate must be mounted with spacers or insulation behind, the recessed...
from €30.71
Art.-Nr.: 4255...
4263_01 Wall mount for REFLEKS oil heaters 66 M/M-C
This wall mount from stainless steel was developed by REFLEKS specifically for their oil heaters 66 M/M-C. Simply mount the heater with screws to a bulkhead instead of on the floor.
€60.44
Art.-Nr.: 4263...
1 From 3
Top seller
4255_02 Wall shade inox
from €30.71