Switches for Pumps

1 From 2
No results were found for the filter!
1434_01 Float switch RULE-A-MATIC-PLUS 40A
The floating switch RULE-A-MATIC PLUS 40 allows the automatic switching of a bilgepump. The switch is encapsulated securely in a plastic housing and protected against damage and dirt. Housing L x W x H: 120 x 65 x 70 mm. For 12 - 32 V....
€57.46
Art.-Nr.: 1434...
1434_02 Float switch RULE-A-MATIC-PLUS with alert
The floating switch RULE-A-MATIC-PLUS allows the automatic switching of a bilgepump and the release of the optical/auditory (85 dbA) signal. The switch is encapsulated securely in a plastic housing and protected against damage and dirt....
€93.09
Art.-Nr.: 1434...
1439_01 Float switch RULE-A-MATIC SWITCH 35A
RULE Model No. 35A: This proven and robust floating switch has a high switching power (240 VA) and works for pumps with high initial current. The plastic housing is sonic welded and thus the switch offers a high working security. For 12...
€42.79
Art.-Nr.: 1439...
1439_03 Float switch RULE SUPERSWITCH 37A
RULE Model No. 37A: This proven and robust floating switch has a high switching power (240 VA) and works for pumps with high initial current. The plastic housing is ultrasonic welded and thus the switch offers a high working security....
€63.26
Art.-Nr.: 1439...
1439_04 Float switch JABSCO HYDRO AIR
Pump switch without moving parts or delicate sensors. Switching power 240 VA. Switch function is triggered by air pressure. No electric installation underwater. Includes: Plastic measuring bell, 1.8 m air hose (diameter = 8 mm), Switch...
from €71.17
Art.-Nr.: 1439...
1814_01 Switch panel for bilge pump SEAWORLD
Switch panel for automatic bilge pump. With sound and light alarm when pump is running automtically. With toggle switch, positions: "automatic/off/manual". With control lights and fuse 16 A/12 V. For 12 volt systems.
€19.30
Art.-Nr.: 1814...
1814_03 Switch panel for bilge pump PHILIPPI
With rocker switch, positions: "automatic / aus / manual". With control light and automatic fuse. For onboard systems of 12 or 24 volts. Switching capacity 192 VA (max. 16 amps with 12 V).
€39.97
Art.-Nr.: 1814...
1814_05 Switch panel for bilge pump SEAWORLD with alarm
Switch panel, made of black plastic, for automatic bilge pump. With switch, positions: "auto / off / manual". With control lights and fuse 16A/12V or 8A/24V. For onboard systems of 12 or 24 volts.
€26.27
Art.-Nr.: 1814...
1814_06 3-way panel switch RULE
Brand name three-way switch for bilge pumps with high switching capacity but without a fuse holder. Black coloured stainless steel panel. For on-board voltage of 12 Volt and 24 Volt. For manual pumping the switch has to be pressed from...
€30.71
Art.-Nr.: 1814...
1828_01 Vacuum switch for impeller pumps
For electric impeller pumps. Protects the pump against damage by dry run. The switch is installed on the sucction side of the pump. Cuts the power supply when the pressure drops, caused by a lack of water. Connected to the sucction tube...
€60.92
Art.-Nr.: 1828...
1828_03 WHALE field sensor bilge switches BE9003 / BE9006
This electronic bilge pump switch works without any mechanical parts. Two electronic field sensors switch the connected pump: "ON" at bilge water level 51 mm, "OFF" at water level 13 mm. BE9006 switches with automatic 30 sec off delay....
€57.51
Art.-Nr.: 1828...
1829_01 Float switch
Floating switch of ABS plastic. Switch power, max. 180 VA, Voltage 12 - 32 Volts, Switch range 20 - 50 mm of water depth.
€26.27
Art.-Nr.: 1829...
1 From 2