Check Valves & Bilge Strainers

No results were found for the filter!
1926_01 Bilge strainer WHALE
With integrated check valve for hoses of 25 mm and 38 mm. With sieve on the onboard side.
€30.71
Art.-Nr.: 1926...
1926_02 Bilge strainer WHALE
With integrated check valve for hoses of 25 mm and 38 mm. With sieve on the outboard side.
€30.71
Art.-Nr.: 1926...
1926_05 Bilge strainer WHALE
Bilge strainer with check valve, easy to clean. With 19 mm hose connector. The connector can be mounted in three directions: standing, horizontal, sideways.
€48.64
Art.-Nr.: 1926...
1929_01 Check valve WHALE
Plastic design with rubber valve for use as a through hull.
€29.15
Art.-Nr.: 1929...
1929_02 Non return valve WHALE
Plastic design with rubber hose vent for use as a through hull.
€32.07
Art.-Nr.: 1929...
1929_05 Check valve WHALE
Small spring-loaded vent, intended for hand pumps. The vent is attached directly to the suction hose (12 mm), as close as possible to the tank.
€13.16
Art.-Nr.: 1929...
1929_06 Check valve PLASTIMO
Plastic non-return valve with oil-proof nitrile rubber valve. The valve housing is easy to open (for maintenamce). In narrow spaces, the straight gland can be replaced with an angled one. Entire length 185mm.
from €6.73
Art.-Nr.: 1929...
1929_07 Non return valve JABSCO
Non return valve made from plastic by the global market leader JABSCO with hose connectors on both ends and a check valve made from Nitrile rubber.
from €28.50
Art.-Nr.: 1929...
1934_01 Brass bilge water strainer
Special brass, with non-return valve, strainer can be unscrewed.
from €18.03
Art.-Nr.: 1934...
1939_01 Siphonbreak vent
Loop valve. Chromed brass. For installation in outlet toilet or pump tubing or in water cooled engine exhaust (does not work on the inlet side). Prevention against the siphon effect in tubes and pipes. Opens under vacuum pressure....
€16.08
Art.-Nr.: 1939...
1953_01 Brass check valve
Brass check valve, spring operated. To be fitted in the tube to prevent reflux of water. With inner threads on both sides. Strong body of brass, valve cage of nylon, spring of A2 stainless steel, seal of nitrile rubber. The valve works...
from €12.58
Art.-Nr.: 1953...
1984_01 Non return valve from TRUDESIGN
Non return valve made from glass fibre reinforced composite plastic fitted on both ends with a hose connector. The valve plug is made from nylon with a stainless steel spring, the length is 85 mm. TRUDESIGN is the world leader in...
from €13.55
Art.-Nr.: 1984...