Draining Plugs & Cockpit Drains

Many classic and modern yachts have a self-draining cockpit above the waterline. The cockpit drains or scuppers are located at the lowest point of the cockpit floor. Incoming water can flow out through bilge pipes or hoses. Tenders, dinghies, smaller sailboats or trailer boats often have small openings or through-hulls just above the waterline. If the boat is pulled up the slipway, water runs together at the stern and can flow off. While the boat is in the water, the openings have to be sealed with appropriate drain plugs. Of course, these fittings also have … Read more
Many classic and modern yachts have a self-draining cockpit above the waterline. The cockpit drains or scuppers are located at the lowest point of the cockpit floor. Incoming water can flow out... read more »
Close window
Draining Plugs & Cockpit Drains
Many classic and modern yachts have a self-draining cockpit above the waterline. The cockpit drains or scuppers are located at the lowest point of the cockpit floor. Incoming water can flow out through bilge pipes or hoses. Tenders, dinghies, smaller sailboats or trailer boats often have small openings or through-hulls just above the waterline. If the boat is pulled up the slipway, water runs together at the stern and can flow off. While the boat is in the water, the openings have to be sealed with appropriate drain plugs. Of course, these fittings also have …

… other uses, for example as sealing plugs for fish boxes, water tanks or rain barrels. In addition to self-bailers for sailing dinghies, Toplicht has a large selection of shapely boat drain plugs and sealing plugs made of brass, well designed for installation on classic wooden boats.

1 From 2
No results were found for the filter!
1449_01 ELVSTRÖM bailer
Named for their inventor, the famed Danish racer Paul Elvström, these bailers have been made in Denmark since 1964 by ANDERSEN . Material: A4 stainless steel, simple to install, and indispensable for every dinghy and daysailer. The...
from €51.66
Art.-Nr.: 1449...
1901_01 Brass cockpit drain
Cockpit drain with hose attachment. Made from brass, with flat abutting face. Inox spiral strainer is easy to remove, also available as spare part.
from €16.08
Art.-Nr.: 1901...
1901_02 Locker seat drain
Lead-through to countersink made from brass. With 10 mm hose nipple. Perfectly suited to drain off small amounts of remaining water, for instance from locker seats, anchor locker, cockpit seats, etc. For wall thickness of up to 20 mm, a...
€9.55
Art.-Nr.: 1901...
4330_01 Drain plug brass
Brass drain plugs with flat flanges and even nozzle. These plugs can be mounted in the transom or outer hull, in order to allow bilgewater to run out (when pulled). Other installations are possible.
from €14.13
Art.-Nr.: 4330...
4330_03 Drain plug brass
Polished brass drain plug. These drain plugs have long flanges and locknuts for screwing them through the outer hull.
€14.57
Art.-Nr.: 4330...
4330_04 Drain plug nylon
Functional screw-in plug. Flange and drain plug of white nylon. The screw is most commonly mounted in the transom from the outside, to drain bilge or cockpit water.
€5.75
Art.-Nr.: 4330...
4330_05 Drain plug
Drain plug with flat brass flange, rolled or chromed finish, with plug of black nylon.
€6.78
Art.-Nr.: 4330...
4330_06 Drain plug
Strong screw-in plug for mounting in the transom (from the outside) or from the inside. Brass, rolled or chromed finish. Hexagonal flange with backing flange and seal. The plug is secured against loss.
€40.84
Art.-Nr.: 4330...
4330_07 Drain plug / through-hull
Very robust, thick-walled, polished-brass drain plug. This drain plug is screwed through the outer wall with a long flange and nut and can also be used as a through-hull fitting. Screw plug with strong handle and long threaded piece.
from €15.11
Art.-Nr.: 4330...
4330_08 Rubber sealing plug with swivel pin from brass
Rubber sealing plug with swivel pin from brass as plug to drain. With a black expansion ring from rubber. Expansion ring D= 3/4" (19 mm) and 1" (25 mm).
from €17.45
Art.-Nr.: 4330...
4330_09 Rubber sealing plug from brass with lever
Rubber sealing plug from brass with lever as plug to drain. With a black expansion ring from rubber 7/8" (D=22mm).
€12.62
Art.-Nr.: 4330...
4330_10 Drain plug from stainless steel
Drain plug of oval shape made completely from stainless steel with O-ring sealing.
€14.52
Art.-Nr.: 4330...
1 From 2

… other uses, for example as sealing plugs for fish boxes, water tanks or rain barrels. In addition to self-bailers for sailing dinghies, Toplicht has a large selection of shapely boat drain plugs and sealing plugs made of brass, well designed for installation on classic wooden boats.