No results were found for the filter!
4794*01 RHEINSTROM Deckwasch- und Lenzpumpe Typ 4E RHEINSTROM deck wash and bilge pump type 4E
High-capacity impeller pump. Housing and pumping gear of seawater-proof bronze. The pump works with a shaft seal and a robust internal motor. Not dry self-priming, the pump must first be filled with water during starting. Technical data...
from €859.00
Art.-Nr.: 4794...
4795_01 RHEINSTROM diaphragm pump M50E
Very powerful, self-priming electrical diaphragm pump with reliable industrial motor. This Rheinstrom diaphragm pump has been found to be very reliable over many years. It can be used as a bilge pump, a grey water pump and a delivery...
€870.00
Art.-Nr.: 4795...
4795*02 Reparaturset f. Membranpumpe RHEINSTROM M50 / M50E Repair kit for RHEINSTROM diaphragm pump M50 &...
Repair kit #0350095 for the RHEINSTROM diaphragm pump M50 and M50E. The set consists of the pump membrane, a large seal and three valve flaps made from plastic.
€98.00
Art.-Nr.: 4795...
4797*01 Fäkalien-Membranpumpe RHEINSTROM M RHEINSTROM waste water pump type M
The sewage pump RHEINSTROM M is a self-priming diaphragm pump with bronze housing. Even bigger solids can be conveyed without damaging the pump because of the lip valves which have been installed. The self-locking valves make the pump...
from €899.00
Art.-Nr.: 4797...
4949*01 Impellerpumpe 230V JABSCO UTILITY Impeller pump 230V JABSCO UTILITY
Self-priming general purpose pump with built-in dry-running protection for up to 30 minutes after initial prime. The pump is made from bronze, the impeller from oil-proof nitrile rubber, the shaft from stainless steel with a...
from €845.00
Art.-Nr.: 4949...
4796*01 RHEINSTROM Deckwasch- und Lenzpumpe Typ 6E RHEINSTROM deck wash and bilge pump type 6E
Heavy pump with a saltwater-proof bronze housing and free-running gear. Because of its robust construction, the pump moves not only saltwater, but also sand and dirt mixtures with up to 6 mm grit. Not dry self-priming, must be filled...
from €1,425.00
Art.-Nr.: 4796...