Ship's Bells & Gong


Close window
Ship's Bells & Gong


1 From 2
No results were found for the filter!
1515_01 Brass bow shackle
Bow shackle with screw-in pin. Made from polished cast brass.
from €3.30
Art.-Nr.: 1515...
3024*01 Signalgong Signal gong
Large gong made of polished brass. Type-tested and approved by the BSH (Federal Maritime and Hydrographic Agency Germany). Equipment regulation according to KVR/COLREG, regulation 33a: All vessels over 100 m carry a gong in addition to...
€459.00
Art.-Nr.: 3024...
3990*01 Glocke Messing-Sandguss Brass ship's bell
Heavy ship's bell with exceptionally canorous sound made from brass. Handmade in Germany, using a traditional sand-casting technique. Every bell is cleanly dressed to size and polished after casting, the top and suspension bracket are...
from €34.90
Art.-Nr.: 3990...
3990*02 Glockengravur Bell engraving
Engraving: When desired we will have all bells from 200 mm diameter up engraved for you. The beww must be ordered separatly. The delivery time is about 3 weeks. Please give the exact text under "remarks" when ordering , in the desired...
from €99.50
Art.-Nr.: 3990...
3991_01 Bell lanyards handmade
Traditional bell lanyard. Cleanly crown-plaited by hand, with brass or stainless steel thimble. Unrottable polyester hemp rope, natural color.
from €11.50
Art.-Nr.: 3991...
3991_02 Bell lanyard nylon handmade
Bell lanyard of white nylon rope. Cleanly crown plated by hand, with brass thimble.
€24.90
Art.-Nr.: 3991...
3991_04 Bell lanyard handmade
Traditional bell lanyard for large bells. Crown plaiting with turks heads, with brass thimble. Of natural polyester hemp rope, cleanly hand-worked. Natural color.
from €21.90
Art.-Nr.: 3991...
3993*01 Schiffsglocke mit BSH-Zulassung, Messing poliert BSH approved solid brass ship´s bell
Heavy ship and fog bell made of polished brass. The bell is made in the traditional sand casting process, it is cleanly turned and polished on the outside and cast grey on the inside. The surface is unpainted. Type-tested and approved by...
from €174.00
Art.-Nr.: 3993...
3993*02 Glocke mit Glockenhalter Messing poliert Brass ship`s bell & bracket
Ships bell made from brass with wall bracket. The bell is manufactured in the traditional casting method and has a high gloss finish. The wall bracket is supplied with a mounting wedge: only this piece is screwed on. Thus the bell can...
from €185.00
Art.-Nr.: 3993...
3994*01 Glocke mit Halter, Messing verchromt Ship´s bell with bracket
These bells are die-cast from brass, the surface is brass polished or chrome plated. The sound is clear and very bright. They are lighter than sand cast bells. Supplied complete with bell holder and white ribbon.
from €39.90
Art.-Nr.: 3994...
3995_01 Bracket for bells, curved
Holder for ship's and fog bells. Made from sand-cast brass. Finish either rolled and polished (unlacquered) or chromed. The "A" measurement should be at least 0.6 x the bell's diameter.
from €26.90
Art.-Nr.: 3995...
3995_02 Bracket for bells, straight
Straight wall bracket for ship's bells. Made from sand-cast brass. Finish either rolled and polished (unlacquered) or chromed. This straight holder is also well suited for lamps, etc. When used for a bell, the holder measurement "A"...
€24.90
Art.-Nr.: 3995...
1 From 2