1 From 3
No results were found for the filter!
1388*01 Schwere Windhutze aus Messing-Sandguß Brass cowl vent
Exceptionally heavy and thick-walled vent, made in a small casting workshop in northern Italy. Traditional nautical piece in a round or oval design with matte-polished finish. The sand-casting process by hand creates a finish that, with...
from €314.00
Art.-Nr.: 1389...
1466*01 Lüftungshaube / Windhutze AMERIKA Brass shell vent AMERIKA polished or chromed
Low-profile hood vent, made from polished or chromed brass, for mounting on the hull. Available in two sizes. Mounting using three M6 threaded blind holes.
from €39.90
Art.-Nr.: 1466...
1466*02 Lüfter BERGAMO Messing poliert Brass shell vent BERGAMO
Flat vent made from polished, cast brass. There are two M6 screw bolts and nuts supplied for mounting. Available surfaces are: highly polished brass and chrome.
from €44.90
Art.-Nr.: 1466...
1467*01 Lüftungshauben DAVEY 2467 clam vent DAVEY 2467
This vent, fashioned like a shell and made of polished bronze, screws into the deck. Can be mounted horizontally or vertically on deck or on the superstructure. A cross piece in the opening keeps spray and rainwater from flowing under...
from €91.00
Art.-Nr.: 1467...
1467*02 Lüfter Cowl vent made from cast brass
Beautiful, heavy clam-shell vent. Traditionally sand-cast brass, with a high-gloss polish. Intended for horizontal or vertical mounting on deck or on superstructure. A straight cross piece in this design keeps all wetness from flowing...
from €119.00
Art.-Nr.: 1467...
1468*01 Lüftungshauben / Halbe Windhutzen DAVEY Bronze half cowl vent DAVEY
Polished bronze half-cowl vent to be screwed onto the sides of superstructure or wheel houses. Height 140 mm, opening 60 mm.
€109.00
Art.-Nr.: 1468...
1468*02 Windhutze Bronze DAVEY DL2470 Cowl vent bronze DAVEY DL2470
Elegant, very robust wind scoop from the British manufacturer DAVEY. The vent is made of heavy cast bronze, cleanly hand-polished. Supplied complete with deck fitting, cover and bronze key.
from €698.00
Art.-Nr.: 1468...
1490*02 VETUS Windhutze aus Silikon VETUS Cowl Vents Silicone
Popular and proven ventilation scoops made of durable white silicone rubber with red painted on the inside. The deck flanges and the screw rings are made of white hard plastic. The hoods can be rotated and removed by the screw ring....
from €78.90
Art.-Nr.: 1490...
1490*03 VETUS TRAMONS Windhutze Silikon VETUS TAMON Cowl Vent Silicone
Popular and proven ventilation scoop made of durable white silicone rubber with red painted on the inside. The deck flange and the screw ring are made of white hard plastic. The hood can be rotated and removed by the screw ring. Silicone...
€74.90
Art.-Nr.: 1490...
VETUS Edelstahl Windhutzen JERRY, TOM und YOGI VETUS Stainless Steel Cowl Vents
High-quality, elegant cowl vents made of A4 cast stainless steel. Heavy, thick-walled design, painted red on the inside. Available in three different sizes as model JERRY, TOM or YOGI. A threaded ring, which is screwed to the deck, is...
from €349.00
Art.-Nr.: 1490...
1490*05 VETUS Windhutze Edelstahl DONALD2 VETUS stainless steel cowl vent DONALD
Stylish, high-quality cowl vent made of heavy A4 (AISI 316) cast stainless steel. Painted red on the inside. A threaded ring, which is screwed to the deck, is used to attach the vent. The wind cap is screwed onto the threaded ring using...
€349.00
Art.-Nr.: 1490...
1751-101 Windhutze aus Edelstahl, Oberfläche bronzefarbige Titantuff-Beschichtung Cowl vent bronze or stainless steel finish
Wind scoop (deck vent) made of stainless steel A4 precision casting. Supplied with cover flange and screw cap, watertight thanks to O-ring seal. The wind scoop is extremely stable and particularly corrosion-resistant. The inside is...
€355.00
Art.-Nr.: 1751...
1 From 3