No results were found for the filter!
Oil drain pump Made from oil-resistant plastic, pump cylinder of brass. Comes with 2 hoses. Dimensions: 32 mm x 200 mm. Discharge: 0.1 l/pump.
€24.95
Art.-Nr.: 1815...
Oil extractor The see-through, robust container lets the user know how much oil has been extracted. A built-in float switch automatically stops extraction as soon as capacity is reached. With the pump housed inside the container, simply pump 5 to 10...
€89.95
Art.-Nr.: 2533...
Electric fuel pump HÜCO Electric fuel pump that can be used to bring fuel to a stove if the primary tank is below the level of the fuel regulator and the installation of a day tank is not possible. This membrane pressure pump with electrically regulated...
from €121.00
Art.-Nr.: 4269...
Semi-rotary pump from cast iron Extremely robust hand pump for pumping almost all liquids, even hot ones. The pump is well suited as an oil change and diesel pump. The pumps are not self-priming! The housing is completely made of cast iron and then varnished. The wings...
from €110.00
Art.-Nr.: 4626...
Oil drain pump Made entirely of brass. Comes with 2 mounting clamps and intake manifold (diameter = 6 mm, lenght = 370 mm). Inlet 4" inner threads and 2" outer threads. Dimensions: diameter = 29 mm, lenght = 200 mm. Output: 0.05 l/pump. Avaialble in...
from €89.00
Art.-Nr.: 4643...
Oil drain pump Strong oil pump made entirely of brass. Typ A: intended for hose attachment with two mounting plates. Typ B: with thread M16 x 1,5.
from €49.00
Art.-Nr.: 4647...
Transfer pump A patented intake valve eases the filling of various liquids, for example water, diesel, or gas. The liquid must only be higher than the container being filled, no more sucking with the mouth necessary. Comes with a 2m hose.
from €19.95
Art.-Nr.: 4761...
All-purpose manual pump REILANG RHP500UV The all-purpose manual pump RHP500UV serves for emptying or filling-up with fluids, which do not affect aluminium or brass. Features: universally deployable, casing made of aluminium, smooth-running due to a special slip ring, displaced...
€64.90
Art.-Nr.: 4761...
Self-priming gear pump for oil UP3/OIL MARCO Self-priming gear pump for pumping oil and other liquids. Pump body of brass with bronze gears. Comes with 2 hose clamps (14 mm) and an adapter for 8 mm plastic pipe. Self priming max. 1m. Dimensions: D = 65mm, L = 140 mm, weight 1.4 kg....
from €179.00
Art.-Nr.: 4790...
Suction pipe for oil change pump Accessory for MARCO oil-change gear pumps: The plastic oil-change suction tubes allow a simple vacuum for sucking old oil through the dipstick opening in the engine block. Included: set with two tubes, L = 80cm. Diameter D = 6mm and 8mm.
€19.90
Art.-Nr.: 4790...
Oil change kit MARCO OCK1 Oil-change kit OCK1 for mobile use made by renowned pump manufacturer MARCO: Self-priming gear pump UP3/OIL for pumping oil and other liquids. Brass pump body with bronze gears. Comes with 2 hose nozzles (12mm), hose clamps, suction...
from €169.00
Art.-Nr.: 4790...
Bronze Gear transfer pump MARCO UP3 Self-priming small feed pump with bronze gears, particularly suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Nickel-plated brass pump housing, stainless steel shaft. Suction height 1.5 m....
€164.90
Art.-Nr.: 4791...
Top seller
