No results were found for the filter!
1320*02 Impellerpumpe MARCO UP1 220 Volt Impeller pump MARCO UP1 220 volt
Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. AISI 316L. Voltage:...
€298.00
Art.-Nr.: 1320...
1804*01 Impellerpumpen JABSCO Impeller pump JABSCO
Self-priming impeller pump with free shaft end. Pump housing of bronze, axle of stainless steel, ball bearings, neoprene impeller. Specified output at 1500 U/min and back pressure at 0.3 bar.
from €179.00
Art.-Nr.: 1804...
1804_03 Tool for removing impellers JABSCO
An exceptionally practical tool for removing impellers without damaging the pump housing. Body and jaws of aluminum, shaft of stainless steel. Dimensions, approx. 140 x 165 mm (W x H). Weight, 450 g.
from €79.00
Art.-Nr.: 1804...
1805*03 Impellerpumpe JABSCO UTILITY PUPPY 2000 Impeller pump JABSCO UTILITY-PUPPY 2000
Efficient electric pump with brass housing, impeller of nitrile rubber (oil-proof), dry self-priming to 1.2 m. Power 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), intended for endurance use. Dimensions 190 x 120 x 80 mm....
€349.00
Art.-Nr.: 1805...
1808*01 Impellerpumpen JABSCO m. mechanischer Kupplung Impeller pump JABSCO with mechanical cone clutch
With mechanical cone clutch. These pumps work via a V-belt and can be coupled by hand when needed. Pump with high output (specification at 1500 U/min and a back pressure of 0.3 bar) and self priming from dry. Well suited as an emergency...
from €1,030.00
Art.-Nr.: 1808...
1808*02 Impellerpumpen JABSCO m. elektrischer Kupplung Impeller pump JABSCO eclectric magnet clutch
With electric magnet clutch, 12V or 24V. Pump with high output (specification at 1500 U/min and a back pressure of 0.3 bar), self priming from dry. Well suited as emergency pump or as a deck-wash pump. Pump housing, bronze, stainless...
from €692.00
Art.-Nr.: 1808...
1805*02 Impellerpumpe JABSCO WATER PUPPY 2000 Impeller pump WATER-PUPPY 2000
Efficient electric pump with brass housing, impeller of nitrile rubber (oil-proof), dry self-priming to 1.2 m. Power 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), intended for endurance use. Dimensions 190 x 120 x 80 mm....
€204.00
Art.-Nr.: 1805...
4949*01 Impellerpumpe 230V JABSCO UTILITY Impeller pump 230V JABSCO UTILITY
Self-priming general purpose pump with built-in dry-running protection for up to 30 minutes after initial prime. The pump is made from bronze, the impeller from oil-proof nitrile rubber, the shaft from stainless steel with a...
from €845.00
Art.-Nr.: 4949...
1320*01 Impellerpumpe MARCO UP1 Impeller pump MARCO UP1
Self-priming electric water pump with with rubber impeller. Two sizes available. Nickel plated brass body. Self-priming to 1.5 m high. Also available for 220V AC.
from €99.00
Art.-Nr.: 1320...