1 From 2
No results were found for the filter!
Tankentlüfter aus massivem Messing, gerade Ausführung, mit Zoll-Gewindeanschluss. GUIDI shell scupper vent
Heavy gauge brass tank vent, straight design, with inch thread connection.
from €17.00
Art.-Nr.: 1938...
1938*01 Tankentlüftungen gerade Messing Brass tank ventilation
Straight tank vent. Brass, polished or chromed finish. Vent with metal sleeve. Intended for a maximum hull thickness of 15 mm.
from €17.95
Art.-Nr.: 1938...
1938_02 Brass tank ventilation
Bent tank vent. Brass, polished or chromed finish. All vents have metal sleeves. Intended for a maximum hull thickness of 15 mm. Gland for hose D = 16 mm. Available with the gland bent upwards or downwards.
€24.95
Art.-Nr.: 1938...
1938*03 Tankentlüftung Nylon gerade Nylon tank ventilation
Nylon tank vent, max. wall thickness 15 mm.
€5.75
Art.-Nr.: 1938...
Tankentlüftung versenkt gerade Messing od. Chrom Brass tank ventilation
Fully countersunk tank vent fitting. Brass. Polished or chromed finish. All vents have metal sleeves. Intended for a maximum hull thickness of 15 mm.
from €20.95
Art.-Nr.: 1938...
Tankentlüftung mit Schlauchanschluß nach oben oder nach unten Brass tank ventilation
Bent fully countersunk tank-vent fitting. Brass. Polished or chromed finish. All vents have metal sleeves. Intended for a maximum hull thickness of 15 mm. Available with gland above or below.
€27.95
Art.-Nr.: 1938...
1938*06 Wasserabweiser Stainless steel shell ventilator
Made of plate stainless steel (AISI 316), polished.
from €4.95
Art.-Nr.: 1938...
1942*01 Tankentlüftung Edelstahl versenkt/gerade Tank ventilation stainless steel
Countersunk design, stainless steel (AISI 316) bright polished. The ventilation system has a flame protection screen and a spritz cap. Installation: From the outside with screws. The spritz cap can be turned depending on the installation...
€36.90
Art.-Nr.: 1942...
1942*02 Tankentlüftung Edelstahl versenkt/gebogen Tank ventilation stainless steel
Countersunk design, stainless steel (AISI 316) bright polished. The ventilation system has a flame protection screen and a spritz cap. The spritz cap can be turned depending on the installation situation. Installation: From the outside...
€42.90
Art.-Nr.: 1942...
1942*03 Tankentlüftung versenkt/gebogen Tank ventilation stainless steel
Countersunk design, stainless steel (AISI 316) bright polished. The ventilation system has a flame protection screen and a spray cap. Depending on the installation situation, the spray cap can be rotated so that the hose connection can...
€44.90
Art.-Nr.: 1942...
1942*04 Tankentlüftungen Edelstahl versenkt/gebogen Tank ventilation stainless steel
Countersunk design, stainless steel (AISI 316) bright polished. The ventilation system has a flame protection screen and a spritz cap. Installation: From the outside with screws. Fuel tank ventilation for large hose diameters.
from €44.90
Art.-Nr.: 1942...
1942*05 Tankentlüftungpfeife FUEL WHISTLE Fuel whistle
This practical fitting should always be built in to the vent lines of fuel tanks. When filling, the escaping air makes a whistling noise. Shortly before the tank is full, it skips over to a trilling. The filling can thus be stopped in...
€39.95
Art.-Nr.: 1942...
1 From 2