ICOM IC-M410BB black box VHF radio + CommandMic HM-195GB

The IC-M410BB is a black box marine VHF radio with a remotely mountable control unit as the sole call station.

The waterproof (IPX7) HF unit IC-M410BB can be installed in a place where it will not interfere. All functions, including DSC operation, can be operated with the supplied COMMANDMIC HM-195B. Its cable length of 6.10 metres can be extended to a maximum of 18.30 metres. Two optional OPC-1541 extensions are required for this. You will find these (Article-No. 3938-154) further down on this page under "Accessories" at COMMANDMIC.

Install up to two stations on board, VHF radio available at your desired positions
Up to two COMMANDMIC remote controls can be connected to the IC-M410BB, providing access to the VHF radio and intercom functions. This makes it possible to transmit from two different positions on board. NMEA 2000 and NMEA 0183-HS enable data integration on board. The NMEA 2000 network provides plug-and-play data communication for connection to other marine devices, such as an MFD (multi-function display). The radio can send GNSS (GPS) position, DSC call and radio channel to other devices.

Active noise cancellation - no need to shout into your microphone
Active Noise Cancellation digitally removes background noise from both transmit and receive audio for clear communication, even in noisy maritime environments.

Built-in Class D DSC, "Distress" button can be a lifesaver in an emergency situation
With just one press of the "DISTRESS" button, the inbuilt DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC monitoring function continuously monitors the DSC channel (channel 70) for added safety and protection.

Loud one-way receiver loudspeaker megaphone for radio watch on deck or tower
A built-in 13-watt amplifier increases the audio output to an external call loudspeaker. The 1-way RX hailer function allows you to monitor radio traffic on deck via the loudspeaker megaphone. You can also play foghorn patterns via the loudspeaker megaphone.

Built-in GPS receiver
The built-in GPS receiver displays your current position, date/time and can be used for DSC calls. The GPS antenna supplied eliminates the need for time-consuming connection to other GPS data sources and allows you to flexibly select the location for a good reception signal.

Features:

• NMEA-2000 and NMEA-0183-HS connectivity
• AquaQuake draining function (HM-195B)
• For 12 volt power supply
• Waterproof according to IPX7 (30 minutes at a depth of 1 m)
• Dual/triple channel guard for simultaneous monitoring of channel 16 and/or call channel
• Anchor watch function
• As the user, you can enter your MMSI into the device yourself after switching on the transceiver (once, in accordance with the applicable regulations)
• Additional programming with an ATIS ID is possible after prior activation of this area by the dealer. Please ask us about this.
  

Scope of delivery:

• HF unit IC-M410BB
• One CommandMic HM-195GB with connection cable OPC-1540 (6.1 m)
• GPS antenna
• Power supply cable (DC cable 2 m)
• Microphone suspension
• Connection cap
• Mounting bracket

More detailed technical details (operating instructions) can be found as a pdf file further down on this page under "Downloads & Information".