Products from Trudesign

Trudesign

TRUDESIGN

Die Fittinge von TRUDESIGN sind aus hochfestem, glasfaserverstärkten Komposit-Kunststoff gefertigt. Vorteile: Hohe Festigkeit, temperaturbeständig -40° bis 80°, öl- und chemikalienbeständig, elektrisch nicht leitend, absolut korrosionsbeständig. Alle TRUDESIGN Fittinge haben zylindrische Whitworth-Rohrgewinde BSP nach ISO 228-1, sie lassen sich problemlos zusammen mit Armaturen aus Messing, Rotguss oder Edelstahl verwenden. Die Kugelventile und Borddurchführungen sind zugelassen und zertifiziert nach ISO 9093-2 durch IMCI und BUREAU VERITAS.

1 From 3
No results were found for the filter!
1908*07 Schlüssel für Deckseinfüllstutzen Universal opener for deck fills
Universal deck plate spanner for deck fills. Functional plastic tool. Fits current covers. Slit clips: 32 x 3,5 mm und 38 x 4 mm.
€8.95
Art.-Nr.: 1908...
1984*01 Rückschlagventil TRUDESIGN Non return valve from TRUDESIGN
Non return valve made from glass fibre reinforced composite plastic fitted on both ends with a hose connector. The valve plug is made from nylon with a stainless steel spring, the length is 85 mm. Suitable for fresh water pipe systems....
from €13.90
Art.-Nr.: 1984...
4657*04 Aktivkohle-Geruchsfilter TRUDESIGN Active carbon filter TRUDESIGN
For the installation in the ventilation pipe of the black water tank. A Carbon Filter is a useful addition to a holding tank vent pipe to reduce the odour of sewage. The activated carbon in the filter absorbs and converts the odours from...
€55.00
Art.-Nr.: 4657...
6985*01 Kugelhahn TRUDESIGN Manual ball valve TRUDESIGN
On both ends BSP internal thread, colour black with blue handle and a locking nose for a padlock. The ball cock is smooth-running, the ball PTFE sealed with reduced passage. On request also available with sensors for an electronic...
from €49.90
Art.-Nr.: 6985...
6985_02 Installation wrench for TRUDESIGN ball valve
Practical installation wrenches for all sizes of TRUDESIGN through ball valves. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every...
from €6.90
Art.-Nr.: 6985...
6985_03 Load Bearing Collars TRUDESIGN
The load bearing collar is a linkage developed by TRUDESIGN, which is mounted inboards between the sea cock and the through hull. The collar increases the load bearing area of the valve in order to increase the toughness against the...
from €27.90
Art.-Nr.: 6985...
6985_04 Monitored manual ball valve TRUDESIGN
Manual ball valves with blue handle, made from plastic by TRUDESIGN, for electronic position monitoring. The fitting display panel for electronic monitoring (under Suitable Items below) has to be ordered separately.
from €117.00
Art.-Nr.: 6985...
6985_05 Display for monitored ball valve TRUDESIGN
Position Monitoring allows for remote monitoring of the ball valve position from an accessible location. The Position Monitoring circuit can also be used as part of an engine or generator start interlock to ensure these don not start...
€238.00
Art.-Nr.: 6985...
6986_01 BSP through hull TRUDESIGN
With continuous BSP thread, the outer flange is mushroom-shaped, colour black or white. Shipping complete with sealing washer made from Polyamide. Available also with hose connector or conical flange to countersink. TRUDESIGN is the...
from €9.90
Art.-Nr.: 6986...
6986*02 Montageschlüssel für Borddurchführung TRUDESIGN Installation wrench for TRUDESIGN through hull
Practical installation wrench for all sizes of TRUDESIGN through hulls. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part...
€3.00
Art.-Nr.: 6986...
6986_03 Skin Fitting Install Tool TRUDESIGN
The smart tool for mounting through hulls single handed. Awarded with the DAME AWARD in 2016. With this tools it is no longer necessary to hold onto the through hull from the outside. TRUDESIGN is the world leader in fittings made from...
from €6.00
Art.-Nr.: 6986...
6987*01 Gerade Schlauchtülle TRUDESIGN Straight threaded hose fittings from TRUDESIGN
Outer thread BSP, hexagonal, colour black. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile...
from €4.50
Art.-Nr.: 6987...
1 From 3
Top seller
2257*02 Unterlegscheiben aus Bronze Bronze washers
from €0.35
2710-300 Teakdecking Systems Decksfugenmasse SIS440 TDS Marine Deck Caulkling Sealant
Content 0.3 Liter (€80.67 * / 1 Liter)
from €24.20
Katalog_2024_Artikeldetailseite TOPLICHT equipment catalogue
Content 1 piece
€0.00
2609_01 Foam brush
from €1.65
2050*01 EPIFANES Bootslack klar EPIFANES Clear Varnish
Content 0.25 Liter (€63.60 * / 1 Liter)
from €15.90
4025*01 Fingerschnäpper aus Messing Elbow catch
from €4.95
2240*01 LOXX Persenningknopf / Schnellverschluss mit federndem Innenleben LOXX fasteners
from €1.65
1024_01 Shock cord
from €1.00
2748*01 Bitumenspachtelkitt Bituminous mastic
Content 1 kg
from €11.90
1065*01 Rettungsleine Safety line
from €0.45
2059*23 EPIFANES Farbrührstäbe EPIFANES Paint stirrer
Content 1 piece
from €0.50
2621*02 COELAN Bootsbeschichtung transparent glänzend COELAN Boat Coating transparent gloss finish
Content 0.75 Liter (€97.20 * / 1 Liter)
from €72.90
2294_01 Copper boatnails / rivets
Content 1 kg
from €59.90
2720*01 WEST SYSTEM Epoxy im Set mit Harz und Härter WEST SYSTEM set with resin and hardener
Content 1.2 kg (€58.25 * / 1 kg)
from €69.90
2711*01 SIKAFLEX 291i universal Marine Dichtmasse SIKAFLEX 291 Adhesive Sealant
Content 0.07 Liter (€135.71 * / 1 Liter)
from €9.50
1922_03 T-bolt clamp
from €5.90
2701*02 BOSTIK SIMSON CA (Construction Adhesive) BOSTIC SIMSON CA (Construction Adhesive)
Content 0.29 Liter (€61.90 * / 1 Liter)
from €17.95
2737*01 Staubbindetücher Adhesive cloth
from €2.95
1593_01 Clevis pin
from €1.90
2602*01 Flachpinsel Brush
from €1.40
2097*02 BORACOL Holzschutzmittel Boric wood impregnation BORACOL
Content 1 Liter
from €32.90
2055*01 EPIFANES MONO-URETHANE Bootslack EPIFANES MONO-URETHANE Yacht Paint
Content 0.75 Liter (€50.53 * / 1 Liter)
€37.90
2296_01 Copper roves
Content 0.5 kg (€107.00 * / 1 kg)
from €53.50
1024*02 Kunststoffhaken Plastic hook
from €0.70
2053*01 EPIFANES Bootslack EPIFANES Yacht Enamel
Content 0.75 Liter (€45.20 * / 1 Liter)
€33.90
2501_01 OWATROL MARINE D1 penetrating oil
Content 1 Liter
from €28.90
1932*01 Fäkalien-Spiralschlauch Waste hose
from €6.40
2207*01 TESA Fugenboden-Abdeckband TESA seam covering tape
Content 50 m (€0.10 * / 1 m)
from €4.85