Hart Steuerbord â ein traditionelles, klassisches Steuerrad mit Holzspeichen ist eine dekorative, maritime NautiquitĂ€t, die sich Seefahrtsromantiker gern zuhause in die Wohnung hĂ€ngen. Klassische Radsteuerungen werden aber noch stets in der Traditionsschifffahrt und auf Yachten verwendet. Sie haben gegenĂŒber direkten Pinnensteuerungen den Vorteil, dass sie nicht direkt ĂŒber dem Ruderschaft, bzw. der Ruderachse eingebaut werden mĂŒssen und weniger Raum benötigen. Das Steuerrad hĂ€ngt an einer SteuersĂ€ule, die an gĂŒnstiger Stelle ...
Steuerrad, Pinne & Ruder
Steering wheels
STAZO yacht steering wheel teak with teak outside ring
Ab
329,00 ⏠*
Attractive, sturdy 6-spoke steering wheels made of matt lacquered teak wood. With sturdy teak outer ring.The wheels have a high-quality finish:The six turned spokes and the rim parts are glued and sturdily screwed together with a rim bandThe rim tape is made of brass or chrome-plated brassThe hub is covered by a hemispherical hub cap made of (chrome-plated) brassThe hub with the special hub adapter made of black DELRIN hard plastic allows the wheels to be used for virtually all common mechanical and hydraulic steering systems.The hub adapter (1400-005) suitable for MORSE/TELEFLEX/ULTRAFLEX or VETUS MT30/50 is supplied as standard.If a different adapter is required, see table under Article-No. 1400-005!
Adaptor for STAZO steering wheels
Ab
29,90 ⏠*
Adapter for STAZO-Yacht-Steering Wheels.This adapter allows a precise and solid connection between the rudder post and the steering wheel.The most common standard design is made of DELRIN plastic.STAZO-Yacht-Steering Wheels come standard with DELRIN Adapter Article-No. 1400-005 for the following steering systems: TELEFLEX / ULTRAFLEX / LS / VETUS (new)!Custom made adapters with other bores or made from stainless steel are available on request.
Steering wheel EDSON made from cast bronze
Ab
1.290,00 ⏠*
A very special steering wheel from the commercial shipping sector, which is characterised by its simplicity and robustness.The wheel is made from cast bronze, the surface is tumbled, therefore matte and is equipped with handles from teak.The well known manufacturer EDSON comes from the USA and has produced high quality steering wheels and steering gear for more than 150 years.Shipping with a cylindrical boring of 1" (25,4mm) fitting for example to steering gear and hydraulic systems by EDSON and WAGNER or conic bores of 3/4" (17/19mm) for SEASTAR/HYNAUTIK, TELEFLEX, MORSE, KOBELT, L&S, HYDRIVE and ULTRAFLEX.
STAZO steering wheel teak
Ab
798,00 ⏠*
Decorative, solid 6-spoke steering wheel made from teak with a high-quality finish. Laminated for waterproofness and varnished. The wheels show high-quality workmanship made by STAZO. The hub is made from saltwater-resistant light metal, with a polished brass cover. The standard adaptor (1400-005) works for MORSE/TELEFLEX/ULTRAFLEX or VETUS MT30/50. If you need another adaptor, see the table under Art-Nr.1400-005!
STAZO yacht steering wheel teak / brass or Teak / chromed
Ab
199,00 ⏠*
Decorative, solid 6-spoke steering wheel made from matte-varnished teak.The wheels show high-quality workmanship:The six turned spokes and the rims are laminated and screwed to a rim band.The rim band is available in brass or chromed brass.The hub is covered by a semicircular cap made from brass or chromed brass.The hub works with a special black DELRIN-plastic adaptor to allow the wheel to work with virtually all geared and hydraulic steering systems.The standard adaptor (1400-005) works for MORSE/TELEFLEX/ULTRAFLEX or VETUS MT30/50.If you need another adaptor, see the table under Art-Nr.1400-005!Design:Teak steering wheel without outer ring,metal rim band.
STAZO yacht steering wheel mahagony with wooden outside ring
Ab
329,00 ⏠*
Attractive, sturdy 6-spoke steering wheels made of matt lacquered mahogany wood. With sturdy mahogany outer ring.The wheels have a high-quality finish:The six turned spokes and the rim parts are glued and sturdily screwed together with a rim bandThe rim tape is made of brass or chrome-plated brassThe hub is covered by a hemispherical hub cap made of (chrome-plated) brassThe hub with the special hub adapter made of black DELRIN hard plastic allows the wheels to be used for virtually all common mechanical and hydraulic steering systems.The hub adapter (1400-005) suitable for MORSE/TELEFLEX/ULTRAFLEX or VETUS MT30/50 is supplied as standard.If a different adapter is required, see table under Article-No. 1400-005!
STAZO yacht steering wheel Teak with stainless outside ring
Ab
376,00 ⏠*
Decorative, solid 6-spoke steering wheel made from matte-varnished teak.With strong outside ring from stainless steel.The wheels show high-quality workmanship:The six turned spokes and the rims are laminated and screwed to a rim band.The rim band is chromed brass.The hub is covered by a semicircular cap made from brass or chromed brass.The hub works with a special black DELRIN-plastic adaptor to allow the wheel to work with virtually all geared and hydraulic steering systems.The standard adaptor (1400-005) works for MORSE/TELEFLEX/ULTRAFLEX or VETUS MT30/50.If you need another adaptor, see the table under Art-Nr.1400-005!Yacht steering wheel with stainless steel outer ring.
STAZO yacht steering wheel Teak with brass
Ab
239,00 ⏠*
Decorative, solid 6-spoke steering wheel made from matte-varnished teak.The wheels show high-quality workmanship:The six turned spokes and the rims are laminated and screwed to a rim band.The rim band is wood.The hub is covered by a semicircular cap made from brass.The hub works with a special black DELRIN-plastic adaptor to allow the wheel to work with virtually all geared and hydraulic steering systems.The standard adaptor (1400-005) works for MORSE/TELEFLEX/ULTRAFLEX or VETUS MT30/50.If you need another adaptor, see the table under Article-No. 1400-005!
STAZO Teak yacht steering wheel with teak outside ring
Ab
354,00 ⏠*
Decorative, solid 6-spoke steering wheel made from matte-varnished teak.With strong teak outside ring.The wheels show high-quality workmanship:The six turned spokes and the rims are laminated and screwed to a rim band.The rim band is wood.The hub is covered by a semicircular cap made from brass or chromed brass.The hub works with a special black DELRIN-plastic adaptor to allow the wheel to work with virtually all geared and hydraulic steering systems.The standard adaptor (1400-005) works for MORSE/TELEFLEX/ULTRAFLEX or VETUS MT30/50.If you need another adaptor, see the table under Article-No. 1400-005!Teak steering wheel with teak outer ring.
STAZO Teak yacht steering wheel with stainless outside ring
Ab
408,00 ⏠*
Decorative, solid 6-spoke steering wheel made from matte-varnished teak.Outside ring of stainless steel ( D = 25mm).The wheels show high-quality workmanship:The six turned spokes and the rims are laminated and screwed to a rim band.The rim band is wood.The hub is covered by a semicircular cap made from chromed brass.The hub works with a special black DELRIN-plastic adaptor to allow the wheel to work with virtually all geared and hydraulic steering systems.The standard adaptor (1400-005) works for MORSE/TELEFLEX/ULTRAFLEX or VETUS MT30/50.If you need another adaptor, see the table under Art-Nr.1400-005!Yacht steering wheel with outside ring of stainless steel (D = 25 mm).
STAZO steering wheel with wooden outside ring
Ab
1.155,00 ⏠*
Large 8-spoke STAZO steering wheel.Made from teak with a high-quality finish:With teak outside ring.Laminated for waterproofing, screwed and varnished.The hub is made from saltwater-resistant light metal, with a polished- (or chromed-) brass cover.The wheel's outer ring and rim band are teak.Important ordering information: In the standard version the hub will be drilled or tapered appropriate to the cone of the steering system according to the specifications of the customer before the manufacture of the wheel in the factory.Please count on a delivery time of at least one week.Alternatively there are steering wheels with adaptors made from DELRIN and aluminium available, see the link below. Please let us know the exact information about your steering system or cone and keyway when ordering! Available on request: steering wheels with additional bezels made from brass; steering wheels with chromed hub cover; steering wheels from mahogany; larger steering wheels with a diameter of up to 1,50m.
STAZO steering wheel
Ab
879,01 ⏠*
Large 8-spoke STAZO steering wheel.Made from teak with a high-quality finish:Laminated for waterproofing, screwed and varnished.The hub is made from saltwater-resistant light metal, with a polished- (or chromed-) brass cover.The wheel's rim band is teak. No outer ring.Important ordering information: In the standard version the hub will be drilled or tapered appropriate to the cone of the steering system according to the specifications of the customer before the manufacture of the wheel in the factory.Please count on a delivery time of at least one week.Alternatively there are steering wheels with adaptors made from DELRIN and aluminium available, see the link below. Please let us know the exact information about your steering system or cone and keyway when ordering! Available on request: steering wheels with additional bezels made from brass; steering wheels with chromed hub cover; steering wheels from mahogany; larger steering wheels with a diameter of up to 1,50m.
Helmsman's seat
Helmsman's folding seat
199,00 ⏠*
A beautiful and patented solution to provide the helmsman with a seat. The seat is screwed onto the vertical bulkhead and can be folded up and down again with just one movement. When folded it lies quite flat and saves space on the bulkhead. Seat made of varnished beech wood, depth 28 mm. Patent folding fitting made from a high-strength brass alloy. Also suitable for creating seating at home, on the balcony etc. Made in Germany.
Handles for steering wheel & tiller
Folding handle for steering wheel
51,90 ⏠*
Pivoting varnished-teak grip.Brass mounting plate (34 x 45mm) screws on.
Fixed handle for steering wheel
39,90 ⏠*
Fixed teak handle that is bolted to the steering wheel. Handle length 110 mm, bolt M10 x 70 mm.
Turning knob for steering wheel
31,90 ⏠*
Turning knob for steering wheels, made from hand-polished stainless steel.The included stainless steel bracket allows mounting on spokes or the outer ring (D = approx. 20 mm). Knob diameter 38 mm, bolts 5/16" x 15 mm.
Brass tonnetjes
86,00 ⏠*
These little barrels are beautiful tiller handle , as is usual on Dutch flat-bottomed boats.We get three different sizes from a small metal workshop. The Tonnetjex are entirely made of polished brass.The handles, in the shape of barrels, are truely comfortable and are mounted on threaded feet. The square on the foot end, which is embedded in the wood of the tiller, prevents the handle from turning.Threaded pieces of stainless steel with nuts and washers are included.
Teak folding handle for steering wheel
77,90 ⏠*
Folding wheel-turning handle, made from varnished teak and revolving.Solid base plate made from stainless steel that screws onto a spoke on the steering wheel.Spike diameter max. 14 mm, handle length 110 mm, base plate D = 45 mm.
Teak handle for steering wheel
43,90 ⏠*
Appealing turning handle made from varnished teak with a stainless steel cap.A stainless steel clamp allows simple mounting on the outer ring of the steering wheel.The diameter of the ring must be at least 30 mm,turning handle D = 58 mm,bolt M10 x 13 mm.
Fold-down handle STAZO
109,00 ⏠*
Matched to the wooden steering wheels of large ships STAZO manufactures a strong, brass fold-down handle.The shaft thread is M12, length 60 mm, the handle has a length of 85 mm and a diameter of 22 mm.A rotating sleeve sliding over the folding mechanism enables swift turning.Shipping in polished brass.Weight: 295 g.
Teak fold-down handle STAZO
129,00 ⏠*
Tiny folding handle for steering wheels. Varnished teak handle with inox fixing bolt. It fits our STAZO yacht steering wheels with Art.-Nr. 1401- to 1406 but can be adapted to other wheels as well.
Tiller extensions
Stainless tiller fitting HOLT ALLEN
32,00 ⏠*
Cleanly worked fitting of stainless steel, with which tiller extensions can be attached on the tiller so they will pivot and turn. At 13 mm wide, the tiller joint is so thin that it can be used on wood, aluminum or carbon fiber tiller extensions. Dimensions:Base plate 50 x 20 mm.
Plastic spring clip
Ab
2,90 ⏠*
Made from plastic suitable for boat hooks, spinnaker poles as well as tiller extension.Colour: anthracite.
Spring clip, plastic
Ab
3,11 ⏠*
Solid spring clip made from black plastic with two screw holes for mounting.
Boathook holder / spring clip
Ab
2,65 ⏠*
Strong tube clamps (white or black) made from plastic, that can be employed as boathook holders, door handle clamps or bracket fĂŒr the tiller. Up to size 55 x 22 mm the clamps are fixed with one central screw, the larger sizes are fixed with two side screws.Material: UV stabilised plastic SANTOPRENE.Shipping in pairs as a set.Colour: black or white.
Bronze rudder gear SPARTAN
399,00 ⏠*
Light, but very robust folding-tiller fitting, made from heavy duty cast bronze, tumbled matt finish.Stainless-steel bolting.The tiller is screwed or bolted between the cheeks and can be folded into a perpendicular position.Available for UNC rudder shafts of imperial diameters, with keyway and threaded clamp.A quality product from SPARTAN, the American manufacturer of traditional equipment.
Bronze rudder gear SPARTAN heavy
Ab
399,00 ⏠*
Heavy and very robust folding-tiller fitting, made from heavy duty cast bronze, tumbled matt finish. Stainless-steel bolting. The tiller is screwed or bolted between the cheeks and can be folded into a perpendicular position. Available for UNC rudder shafts of imperial diameters, with keyway and threaded clamp. A quality product from SPARTAN, the American manufacturer of traditional equipment.
Tiller fitting DAVEY
225,01 ⏠*
Rudder head for folding tiller.Beautiful, heavy tiller fitting , made from hand-polished cast bronze.Measurements:length L = 200 mmwidth exterior = 45 mmwidth inner = 34 mmweight 1050 gFor 10 mm diameter bolts, single threaded M10.The matching adaptor for rudder shaft must be made separately.
Rubber joint for tiller extension OPTIMIST
9,00 ⏠*
OPTIMIST rubber joint for tiller extension, with DYNEEMA-core.
Rubber joint for tiller extension OPTIPARTS
16,01 ⏠*
OPTIMIST rubber joint for tiller extension, with DYNEEMA-core.
Auto Pilot Tiller Fitting
79,50 ⏠*
The strong bracket made of cast bronze with polished surface enables optimal, horizontal mounting of the tiller autopilot when the tiller of the boat is lower or higher than the fixed end of the autopilot tiller drive. Made in England by DAVEY. Supplied without pin for the inlet socket on the autopilot tiller drive. A hole for inserting the pin corresponding to the autopilot model is provided, Ă 6.5 mm.
Small Bronze tiller fitting
263,00 ⏠*
A strong fitting from cast bronze for sailing dinghys and smaller yachts, elaborately manufactured. Surface: tumbled with matt finish.
Bronze tiller extention joint
317,00 ⏠*
A strong fitting from cast bronze for small yachts, manufactured with great effort. When the tiller extension is lowered onto the tiller aft wards, it is automatically locked. Surface: tumbled with matt finish.
Tiller locks
Tiller Lock NIRO PETERSEN
Ab
68,50 ⏠*
Simple, functional tiller stop, made from polished stainless steel plate. Folds away, thanks to strong hinges.The grating allows you to set a light rudder position appropriate to your boat's specific characteristics.Comes with tiller end piece.
SEASURE Tiller Lock
89,00 ⏠*
The SEASURE Tiller Lock is a simple, easy-to-use system for infinitely adjustable tiller locking in the desired position. This updated version maintains the proven ruggedness of its predecessor (Midshipman II), is suitable for any tiller-steered boat, and particularly useful for single-handed sailing. An integrated snubber ensures better course holding than traditional tiller lashings.The unit is mounted directly beneath the tiller. It consists of a sheave and a lever cam with a toothed slider, both housed in a compact Aluminium body. A rope runs across the aft deck through the sheave with a means of keeping it under tension When the jaw engages the line, tiller movement in both directions is blocked. Releasing the cam frees the line, allowing manual tiller control.When not in use or in an emergency, the line can be quickly snapped out of the block with a downward pull, completely disengaging the tiller. The unit is installed using two screws through the housing. Supplied ready for installation with 2âŻm control line (ĂâŻ9âŻmm) and snubber cord.
Stainless steel tiller cleat
Ab
99,90 ⏠*
Strong helm arrester with a lever clamp made from stainless steel by the German manufacturer NIRO PETERSEN.A cam lever with guide plate enables the continuous arresting of the tiller rope.
Bronze tiller lock
Ab
46,90 ⏠*
The tiller fitting is made from cast bronze.This "comb fitting" is used to lock the tiller at different positions.This fitting set comes complete with comb, tiller pin and deck hinge.May be folded away, when not in use.Bronze, tumbled surface with matte finish. The different sizes have the same inside measurement, B1 = 58 mm. A pair of outside hinges can be swopped against a centre hinge and vice versa.
Tiller lock
62,00 ⏠*
This spring-loaded lever made from stainless steel holds a tensioned line in any position and thus locks the rudder.For 8 to 10 mm lines.Polished stainless steel with black plastic knob.Mountable above or below the tiller.
Rudder fittings
Standard duty rudder gear DAVEY
Ab
237,00 ⏠*
Cast-bronze rudder fitting with polished finish.A complete 4-piece set with two forked fittings for the rudder and two holding plates for the transom.
Wide gauge dinghy rudder gear
229,00 ⏠*
Rudder fitting of cast bronze, hand-polished. Designed for the wider rudders of small to midsize dinghies and daysailers. 4-piece set with two forked fittings (for the rudder) and 2 screw-in plates (for the transom).
Rudder Hangers Brass or Chromed Brass
Ab
16,51 ⏠*
Rudder fittings for dinghies, skiffs and dinghy cruisers made from salt water resistant cast brass (CW617N), surfaces matt rolled or polished chromed.Four pieces are needed for a fitting set (two transom fittings and two rudder fixtures).Available types:S = transom fittings (pintles) with 9mm gudgeon,R = plate fixtures for the rudder blade (long oval or cross like design),G = forked brackets for the rudder blade.
Rudder gear Bronze (for Dories)
433,01 ⏠*
Strong rudder fitting that, thanks to its slim vertical stern fitting, is especially well suited for dories and other boats with pointed stern. Made entirely of hand-polished cast bronze. The Straps are undrilled.The fitting comes complete as a vertical set.
Bronze lightweight rudder gear DAVEY
199,00 ⏠*
Bronze rudder fitting for small dinghies and daysailers.Light design for mounting on one side of a rudder. Minimum rudder depth 15 mm.4-piece set made up of 2 pintles for the rudder and 2 gudgeons for the transom.
Bronze heavy duty rudder gear DAVEY
469,00 ⏠*
Strong, solid rudder fitting made from cast bronze, hand-polished.For wide rudders, mid-sized dinghies and small cruisers.4-piece set with two forked fittings (for the rudder) and 2 plates (for the transom).